Right Angle (L-shaped) ECP for Subsurface Flaws Detection in the Second Layer through the First Layer with Up To 1.5 mm Thickness:
- is an absolute probe built according to the “Reflection” scheme
- designed for testing of load-bearing elements under an aircraft skin
- applied together with the eddy current flaw detectors Eddycon C, Eddycon CL and flaw detectors from other producers.
Designation | Outer diameter, mm/inch | Drop length, mm | Length, mm/inch | Frequency | Connector | Material | Detected flaws |
SSP3K5A7.5Dx3-37ASh | 7.5/.3 | 3/.12 | 37/1.5 | 1-25 kHz | Triax Lemo/Fischer | NFe | in aluminum through skin with up to 1.5 mm thickness |
SSP3K5A7.5Dx6.4-37ASh | 7.5/.3 | 6.4/.25 | 37/1.5 | 1-25 kHz | |||
SSP3K5A7.5Dx12.5-37ASh | 7.5/.3 | 12.5/.5 | 37/1.5 | 1-25 kHz |
SSP | 3K | 5A | 7.5D | x | 3 | - | 37 | A | (Sh) |
1 | 2 | 3 | 4 |
| 5 |
| 6 | 7 | 8 |
SSP – sub-surface probe for subsurface flaws detection.
Probe frequency:
“HZ” designates the Hz range; “К” designates the kHz range; “М” designates the MHz range.
Drop angle of a sensing element to the probe axis “5А” is 90º.
Probe tip diameter, mm
Drop length, mm
Total probe length, mm.
Probe type designation: “А”. А – Absolute.
Sh – Shielded sensing element.