Surface ECP for surface and sub-surface defects detection in aluminum and titanium alloys:
- is an absolute transducer built according to the Reflection scheme
- is designed for testing of plane objects or parts with large-radius curvature
- applied together with the eddy current flaw detectors Eddycon C, Eddycon CL and flaw detectors from other producers.
The probe sensing element is located form the butt-end relative to the probe X-axis.
Designation | Tip Ø 'D', | Length, | Centre | Connector | Material | Defects under | Subsurface defects | Protective housing |
SS1.5M05DA0 | 5 | 35 | 1,5 MHz | Lemo 04 | Fe/NFe | up to 0.3 mm | – | – |
SS650K06DA0 | 6 | 35 | 650 kHz | Fe/NFe | up to 0.5 mm | – | – | |
SS400K07DA0 | 7 | 35 | 400 kHz | Fe/NFe | up to 0.5 mm | – | – | |
SS400K08DA0 | 8 | 35 | 400 kHz | Fe/NFe | up 0.5 mm | – | – | |
SS340K09DA0 | 9 | 35 | 340 kHz | Fe/NFe | up to 1 mm | – | + | |
SS170K13DA0 | 13 | 35 | 170 kHz | Fe/NFe | up to 7 mm | + | + | |
SS50K15DA0 | 15 | 50 | 50 kHz | Fe/NFe | up to 9 mm | + | – | |
SS25K33DA0 | 33 | 50 | 25 kHz | Fe/NFe | up to 12 mm | + | – |
SS | 1.5M | 05D | A | X |
1 | 2 | 3 | 4 | 5 |
1. SS – (sub surface) probe for surface and sub-surface defects detection.
2. Probe frequency:
“HZ” designation for Hz range; “К” designation for kHz range; “М” designation for MHz range.
3. ECP tip diameter, mm.
4. Designation of ECP type "А". “А” – Absolute.
5. ECP modification number.