|
|
|
|
VD3-71 universal eddy current flaw detector application for field inspection of aeronautical engineering.
The need of non-destructive testing (NDT) application in aviation demands much of the equipment and technique makers qualification what is connected with a great variety of shape and complexity of testing unitsThereby, it is usually necessary to test the areas of stress concentration: holes for fasteners, panels edge, fillet transitions etc.
|
|
Experience of ULTRASONIC testing of Boeing 737 -300, -400, -500 planes structure elements in operating conditions.
During technical maintenance of BOEING 737 -300, -400, -500 planes (hereinafter referred to as B737) ultrasonic technique of non-destructive testing is widely used (hereinafter referred to as UST).Inspections with the application of UST are carried out both once and from time to time.
|
|
SАUZK “Uniscan-LuCH PSH-10” automated system of ultrasonic testing of longitudinal pipe welds.
Two years have passed since the beginning of mutual cooperation of Ukrainian research institute for non-destructive testing and Khartsyzsk tube-rolling plant (hereinafter referred to as KTRP). Over this period the relations between NDT tools design engineers and one of the major manufacturers of pipe products in post-soviet space have been rapidly developing.
|
|
Scanning instruments for eddy-current flaw detectors.
Introduction Accidents on gasoline lines are often caused by tear-and-wear of pines (more than 1/3 oil-pipelines are 30 years old), by inner corrosion (intraproductive oil-gasoline) and outer corrosion (supply oil-pipelines).Often oil-pipelines are built with breach of pipeline laying depth. 42% of pipes serve on the intraproductive oil-pipelines less than 5 years because of inner corrosion.
|
|
Optical testing systems – industrial endoscopic equipment.
Modern technical endoscopes present optical-mechanical instruments, which are meant for quick and high-quality visual testing of unapproachable parts of objects without dismantling.
|
|
2Wheel pairs NDT mechaniziation - changeover to a new quality level of road safety.
Main up-to-date problems of railway wheel pair NDT at Ukrainian Railways are considered and their solution proposed. The wheel pair NDT installation developed by the Ukrainian S.-R. Institute for NDT is described; its features and advantages are considered.
|
|
Modern instruments for the testing of hardened layer depth.
The article dwells on ultrasonic technique of hardened layer thickness testing, describes it merits and application sphere. The information on the family of instruments, developed by Fraunhofer institute for non-destructive testing techniques (Fraunhofer IZFP), performing this technique is also provided. Technical specifications and embodiment variants are stated, too.
|
|
UD2-70 ultrasonic flaw detector.
The given article provides information on UD2-70 digital ultrasonic flaw detector developed by “Ultracon – Service” company and its performance capabilities in terms of meeting the current requirements for the quality of ultrasonic testing.
|
|
KОU-2М set of calibration blocks according to GOST 14782-86.
It is intended for determination of main parameters of ultrasonic welded joints testing carried out by various ultrasonic flaw detectors. The article provides the information on the main technical specifications and KОU-2М application areas.
|
|
Blocks with notches.
“Ultracon-Service” LLC produces test pieces with notches for the testing of welded joints of pipelines with wall thickness of less than 8 mm. Supplied pieces has the certificate of Dnepropetrovsk centre for standardization, metrology and certification.
|
|
|
|
|
NDT Tools
