Sensing element of eddy-current probe is placed at the angle of 45˚ to the handle axis.
Angle shaft (L-shaped) ECP:
- absolute probe built according to the “Bridge” scheme
- designed for testing of spots with complicated access or parts having protruding elements
- applied together with the eddy current flaw detectors Eddycon C, Eddycon CL and flaw detectors from other producers.
Designation | Tip Ø 'D', | Drop length, | Length, | Centre | Material | Connector |
SU200K3A4.5Dx6.4-105 B | 4.5 | 6.4 | 105 | 200 kHz | Fe/NFe | Triax |
SU500K3A3Dx6.4-105 B | 3 | 6.4 | 105 | 500 kHz | Fe/NFe | |
SU500K3A4.5Dx6.4-105 B | 4.5 | 6.4 | 105 | 500 kHz | Fe/NFe | |
SU500K3A4.5Dx12.7-105 B | 4.5 | 12.7 | 105 | 500 kHz | Fe/NFe | |
SU2М3A2.5Dx2.7-105 B | 2.5 | 2.7 | 105 | 2 MHz | NFe | |
SU2М3A3Dx2.7-105 B | 3 | 2.7 | 105 | 2 MHz | NFe | |
SU2М3A3Dx6.4-105 B | 3 | 6.4 | 105 | 2 MHz | NFe | |
SU2М3A3Dx12.7-105 B | 3 | 12.7 | 105 | 2 MHz | NFe | |
SU6М3A2.5Dx6.4-105 B | 2.5 | 6.4 | 105 | 6 MHz | NFe |
SU | 200K | 3A | 4.5D | x | 6.4 | - | 105 | B(Sh) |
1 | 2 | 3 | 4 |
| 5 |
| 6 | 7 |
1. SU – surface probe for surface flaws detection.
2. Probe frequency:
“HZ” designates the Hz range; “К” designates the kHz range; “М” designates the MHz range.
3. Drop angle of a sensing element to the probe axis “3А” is 45˚.
4. Probe tip diameter, mm.
5. Drop length, mm.
6. Probe length, mm. Standard length of 105 mm (4.1") can be changed upon request.
7. Probe type designation: “B”. “B” – Bridge type probe.
Probes of standard type are manufactured unshielded. In case a shielded probe is required, when making an order, please indicate the letters ”Sh” (Shielded) at the end of a designation code.